Products

Solar modules

THE 3RD GENERATION OF Q CELLS SOLAR MODULES – WE’VE RAISED THE BAR ONCE MORE

Our new G3 solar modules are the gold medalists in the toughest competition in the solar industry – the modern module pentathlon. With the best performance, state-of-the-art technology, outstanding design and the most rigorous testing, you are betting on a winner. We guarantee this by offering you an extended 12-year product warranty and one of the best linear performance warranties on the market.

Find out how our G3 solar modules became the champions in all five disciplines of the modern module pentathlon.


SOLAR CELL TECHNOLOGY: TOP PERFORMANCE FOR MAXIMUM POWER

In the monocrystalline solar modules of our Q.PEAK series a solar cell with full-square format and new busbar design allows for 2 % more energy output.

In our polycrystalline solar modules the record-holding Q.ANTUM cell concept allows for power classes as high as 270 Wp. The innovative dielectric rear surface structure reflects rays of light that have passed through the cell without being utilised. This means that light energy which would otherwise have been lost can now be converted into electricity.


FRAME TECHNOLOGY: FLEXIBILITY FOR HIGHEST LOADS

Our new 35 mm frame allows for lower weight, more flexibility and increased loads. This is made possible by a high-tech aluminium alloy, just like what is used in modern architecture. Thanks to a special thermal treatment, it is particularly tension-resistant, flexible and considerably better than other alloys in terms of its surface properties.
In combination with a high-quality silicon bonding of the laminates our G3 solar modules even resist dynamics loads (wind load) of 5400 Pa (industry standard: 2400 Pa).


ARC TECHNOLOGY: SET YOUR SIGHTS ON MAXIMUM HIT RATES

Module glass with anti-reflection technology helps to minimise undesired reflections by up to 50 %. Due to the high-quality »Sol-Gel Roller Coating« process, Q CELLS modules have an absolutely homogeneous and corrosion-resistant module glass surface. The salt fog test has also been passed with flying colours.


JUNCTION BOX & CONNECTORS: AN ETERNAL CONNECTION

The junction box features a breathable membrane that prevents water from entering while at the same time drawing moisture and heat out – performance sports clothing for our junction boxes! The intelligent design generates at least 50 % less contact resistance, minimizes heat build-up and increases power output. Diodes and cables which are welded instead of soldered  as well as the resistance against ammonia and salt water also guarantee more stability. Even voltages of up to 1000 V are permitted in accordance with UL.

The connectors are intermateable with original MC4 connectors and can be installed using the same tools. Furthermore, 15 % less contact resistance and a robust design makes our connectors even more efficient and resistant against the toughest conditions such as salt water and high mechanical loads. The increased extraction force of 500 N keeps the connectors securely together.


LOGISTICS & WAREHOUSE COST BENEFITS: LOWER LOADS FOR OUR PARTNERS

The slimmer design makes our solar modules real light-weights: 19 kg instead of 19.8 kg for our 60-cell modules, and only 15.5 kg for our 48-cell Q.PEAK S-G3. This simplifies warehousing, logistics and last but not least the installation of our modules.
45 % more modules can be loaded per container because of 29 modules per pallet rather than just 20 modules as before. Hence, our new G3 solar modules also save you up to 31 % on your logistics and storage costs.


HANWHA Q CELLS: TWICE THE POWER FOR YOUR SUCCESS

Behind every great athlet stands a strong team. As the third-largest PV manufacturer the team Hanwha Q CELLS stands for Global Technology Leadership. Q CELLS’ strengths (quality, innovation and performance) unite with the financial resources and global network of the Hanwha Group, one of the largest corporate groups in South Korea. The synergies between Q CELLS and Hanwha offer you the possibility to work with a strong, reliable and leading global solar company.

Q CELLS‘ quality requirements are still unbeaten.
Q CELLS is the first and only solar module manufacturer that has continually and successfully participated in the "Quality Tested" program of the independent German certification authority VDE since 2011. The "Quality Tested" programme raises the bar considerably when compared to standard module tests – in terms of the approval certification as well as the quality controls during production and the number of test cycles. For the very first time, repeat tests have become compulsory. They guarantee the highest quality of solar modules – at all times and at all production sites.
We also test our products in our own module test centre in Germany to a much higher standard than is required by standard tests. In addition, we put our modules ‘through the wringer’ around the world in a number of outdoor test.

HIGH PERFORMANCE. RELIABILITY.

With up to 280 Wp, the new Q.PEAK-G3 is the champion of monocrystalline solar modules. The third module generation from Q CELLS has been optimised across the board: improved output yield, higher operating reliability and durability, quicker installation and more intelligent design – MADE IN EUROPE.

Mouseover for detail


Contact us!

Do you need any additional information?

Click here

Download Certificates

Download here a combined package (zip) of our certificates including the EC Declaration of Conformity, VDE Certifications and a proof of membership at the PV Cycle Association. 

Download


INNOVATIVE ALL-WEATHER TECHNOLOGY

  • Maximum yields whatever the weather with excellent low-light and temperature behaviour.
  • Increased cell efficiency due to full-square monocrystalline cells.
  • Long-term Yield Security due to Anti PID Technology1, Hot-Spot Protect, and Traceable Quality Tra.QTM as well as VDE Quality Tested – the strictest test program.

LIGHTWEIGHT QUALITY FRAME

  • Stability at wind loads of up to 5400 Pa with a module weight of just 19 kg due to slim frame design with high-tech alloy.

PROFIT-INCREASING GLASS TECHNOLOGY

  • Reduction of light reflection by 50 %, plus long-term corrosion resistance due to high quality »Sol-Gel roller coating« processing.

SAFE ELECTRONICS

  • Protection against short circuits and thermally induced power losses due to breathable junction box and welded cables.
  • Increased flexibility due to MC4-intermateable connectors.

MAXIMUM COST REDUCTIONS

  • Up to 29 % lower logistics costs due to higher module capacity per box.

EXTENDED WARRANTIES

  • Investment security due to 12-year product warranty and 25-year linear performance warranty2.

APT test conditions: Cells at -1000 V against grounded, with conductive metal foil covered module surface, 25 °C, 168 h
In accordance in with the Hanwha Q CELLS sales organization of your respective country.

TECHNICAL DATA

Nominal Power265 - 280 Wp
Efficiency15,9 % - 16,8 %
Temperature Coefficient PMPP-0,42%/K
Low-light Behaviour (Irradiance of 200 W/m²)98% of Module Efficiency (in relation to 1000 W/m²)
Dimensions1670 mm × 1000 mm × 35 mm
Weight19 kg

THE 3RD GENERATION OF Q CELLS SOLAR MODULES – WE’VE RAISED THE BAR ONCE MORE

In the extremely competitive solar energy market, performance, safety and endurance, as well as simple installation and outstanding design are of particular importance. Our G3 solar modules are the star athletes of the next generation in every discipline.

Explore the power, versatility and reliability of our champions.

COMPACT. HIGH PERFORMANCE.

With its 48-cell design, the new Q.PEAK S-G3 is the compact powerhouse – perfectly fitting on small, and angled roofs. The third module generation from Q CELLS has been optimised across the board: improved output yield, higher operating reliability and durability, quicker installation and more intelligent design – MADE IN EUROPE.

Mouseover for detail


Contact us!

Do you need any additional information?

Click here

Download Certificates

Download here a combined package (zip) of our certificates including the EC Declaration of Conformity, VDE Certifications and a proof of membership at the PV Cycle Association. 

Download


INNOVATIVE ALL-WEATHER TECHNOLOGY

  • Maximum yields whatever the weather with excellent low-light and temperature behaviour.
  • Increased cell efficiency due to world record-holding cell concept Q.ANTUM.
  • Long-term Yield Security due to Anti PID Technology1, Hot-Spot Protect, and Traceable Quality Tra.QTM as well as VDE Quality Tested – the strictest test program.

LIGHTWEIGHT QUALITY FRAME

  • Stability at wind loads of up to 5400 Pa with a module weight of just 15.5 kg due to slim frame design with high-tech alloy.

PROFIT-INCREASING GLASS TECHNOLOGY

  • Reduction of light reflection by 50 %, plus long-term corrosion resistance due to high quality »Sol-Gel roller coating« processing.

SAFE ELECTRONICS

  • Protection against short circuits and thermally induced power losses due to breathable junction box and welded cables.
  • Increased flexibility due to MC4-intermateable connectors.

MAXIMUM COST REDUCTIONS

  • Up to 29 % lower logistics costs due to higher module capacity per box.

EXTENDED WARRANTIES

  • Investment security due to 12-year product warranty and 25-year linear performance warranty2.

APT test conditions: Cells at -1000 V against grounded, with conductive metal foil covered module surface, 25 °C, 168 h
In accordance in with the Hanwha Q CELLS sales organization of your respective country.

TECHNICAL DATA

Nominal Power215 - 225 Wp
Efficiency15,9 % - 16,7 %
Temperature Coefficient PMPP-0,42%/K
Low-light Behaviour (Irradiance of 200 W/m²)98% of Module Efficiency (in relation to 1000 W/m²)
Dimensions1348 mm x 1000 mm x 35 mm
Weight15.5 kg

THE 3RD GENERATION OF Q CELLS SOLAR MODULES – WE’VE RAISED THE BAR ONCE MORE

In the extremely competitive solar energy market, performance, safety and endurance, as well as simple installation and outstanding design are of particular importance. Our G3 solar modules are the star athletes of the next generation in every discipline.

Explore the power, versatility and reliability of our champions.

VERSATILITY. SAFETY.

The new Q.PRO-G3 is the reliable evergreen for all applications. The third module generation from Q CELLS has been optimised across the board: improved output yield, higher operating reliability and durability, quicker installation and more intelligent design.

Mouseover for detail


Contact us!

Do you need any additional information?

Click here

Download Certificates

Download here a combined package (zip) of our certificates including the EC Declaration of Conformity, VDE Certifications and a proof of membership at the PV Cycle Association. 

Download


INNOVATIVE ALL-WEATHER TECHNOLOGY

  • Maximum yields whatever the weather with excellent low-light and temperature behaviour.
  • Increased cell efficiency due to world record-holding cell concept Q.ANTUM.
  • Long-term Yield Security due to Anti PID Technology1, Hot-Spot Protect, and Traceable Quality Tra.QTM as well as VDE Quality Tested – the strictest test program.

LIGHTWEIGHT QUALITY FRAME

  • Stability at wind loads of up to 5400 Pa with a module weight of just 19 kg due to slim frame design with high-tech alloy.

PROFIT-INCREASING GLASS TECHNOLOGY

  • Reduction of light reflection by 50 %, plus long-term corrosion resistance due to high quality »Sol-Gel roller coating« processing.

SAFE ELECTRONICS

  • Protection against short circuits and thermally induced power losses due to breathable junction box and welded cables.
  • Increased flexibility due to MC4-intermateable connectors.

MAXIMUM COST REDUCTIONS

  • Up to 29 % lower logistics costs due to higher module capacity per box.

EXTENDED WARRANTIES

  • Investment security due to 12-year product warranty and 25-year linear performance warranty2.

APT test conditions: Cells at -1000 V against grounded, with conductive metal foil covered module surface, 25 °C, 168 h
In accordance in with the Hanwha Q CELLS sales organization of your respective country.

TECHNICAL DATA

Nominal Power250 - 270 Wp
Efficiency15,0 % - 16,2 %
Temperature Coefficient PMPP-0,42%/K
Low-light Behaviour (Irradiance of 200 W/m²)98% of Module Efficiency (in relation to 1000 W/m²)
Dimensions1670 mm × 1000 mm × 35 mm
Weight19 kg

THE 3RD GENERATION OF Q CELLS SOLAR MODULES – WE’VE RAISED THE BAR ONCE MORE

In the extremely competitive solar energy market, performance, safety and endurance, as well as simple installation and outstanding design are of particular importance. Our G3 solar modules are the star athletes of the next generation in every discipline.

Explore the power, versatility and reliability of our champions.

AESTHETICS. SAFETY.

The new Q.PRO BLK-G3 is the reliable evergreen for all applications in a complete black design.The third module generation from Q CELLS has been optimised across the board: improved output yield, higher operating reliability and durability, quicker installation and more intelligent design.

Mouseover for detail


Contact us!

Do you need any additional information?

Click here

Download Certificates

Download here a combined package (zip) of our certificates including the EC Declaration of Conformity, VDE Certifications and a proof of membership at the PV Cycle Association. 

Download


INNOVATIVE ALL-WEATHER TECHNOLOGY

  • Maximum yields whatever the weather with excellent low-light and temperature behaviour.
  • Increased cell efficiency due to world record-holding cell concept Q.ANTUM.
  • Long-term Yield Security due to Anti PID Technology1, Hot-Spot Protect, and Traceable Quality Tra.QTM as well as VDE Quality Tested – the strictest test program.

LIGHTWEIGHT QUALITY FRAME

  • Stability at wind loads of up to 5400 Pa with a module weight of just 19 kg due to slim frame design with high-tech alloy.

PROFIT-INCREASING GLASS TECHNOLOGY

  • Reduction of light reflection by 50 %, plus long-term corrosion resistance due to high quality »Sol-Gel roller coating« processing.

SAFE ELECTRONICS

  • Protection against short circuits and thermally induced power losses due to breathable junction box and welded cables.
  • Increased flexibility due to MC4-intermateable connectors.

MAXIMUM COST REDUCTIONS

  • Up to 31 % lower logistics costs due to higher module capacity per box.

EXTENDED WARRANTIES

  • Investment security due to 12-year product warranty and 25-year linear performance warranty2.

APT test conditions: Cells at -1000 V against grounded, with conductive metal foil covered module surface, 25 °C, 168 h
In accordance in with the Hanwha Q CELLS sales organization of your respective country.

TECHNICAL DATA

Nominal Power245 - 265 Wp
Efficiency15,0 % - 16,2 %
Temperature Coefficient PMPP-0,42 %/K
Low-light Behaviour (Irradiance of 200 W/m²)98 % of Module Efficiency (in relation to 1000 W/m²)
Dimensions1670 mm × 1000 mm × 35 mm
Weight19 kg

THE 3RD GENERATION OF Q CELLS SOLAR MODULES – WE’VE RAISED THE BAR ONCE MORE

In the extremely competitive solar energy market, performance, safety and endurance, as well as simple installation and outstanding design are of particular importance. Our G3 solar modules are the star athletes of the next generation in every discipline.

Explore the power, versatility and reliability of our champions.

Power and cost efficiency

With 72 cells, the Q.PRO L polycrystalline solar module is the perfect module for large groundmounted installations. With a module surface of 2 m2 and performance classes of up to 315 Wp, it allows a high energy density per square metre and reduces consequently the BOS costs.


Mouseover for detail


CONTACT

Please get in touch with us!

Hanwha Q CELLS GmbH
OT Thalheim
Sonnenallee 17 - 21
06766 Bitterfeld-Wolfen
Germany

TEL +49 (0)3494 6699-23222
FAX +49 (0)3494 6699-23000
EMAIL sales@q-cells.com

to the contact form

Strong partner

Are you impressed with our product portfolio? You'll find your ideal solar system
at Q CELLS!

more

YOUR EXCLUSIVE TRIPLE YIELD SECURITY

  • Anti PID Technology (APT) reliably prevents power loss resulting from unwanted leakage currents (potential-induced degradation)1.
  • Hot-Spot Protect (HSP) prevents yield losses and reliably protects against module fire.
  • Traceable Quality (Tra.QTM) is the ‚Finger Print‘ of a solar cell. Tra.QTM ensures continuous quality control throughout the entire production process from cells to modules while making
    Q CELLS solar modules forgery proof.
  • Reduced BOS costs Optimised design to reduce costs per Wp.
  • Improved energy yield: The actual output of all Q CELLS solar modules is up to 5 Wp higher than the nominal power thanks to positive sorting.
  • Guaranteed performance Q CELLS offers the best warranties on the market. A 12-year product warranty plus a 25-year linear performance warranty2.

APT test conditions: Cells at -1000 V against grounded, with conductive metal foil covered module surface, 25 °C, 168 h
In accordance in with the Hanwha Q CELLS sales organization of your respective country.

Technical specs

Nominal power295 – 315 Wp
Nominal efficiency15,3 % – 16,3 %
Positive sorting+5 /- 0 Wp
Format1956 mm × 988 mm × 45 mm
Area2 m²
Weight27 kg

Secondary

News